OVERVIEW OF OUR STANDARD
TO THE FOLLOWING STANDARDS OR SPECIFICATIONS MAY BE EXAMINED
-
*die Norm wurde zurückgezogen
-
Application of cement mortar lining for cast iron pipes, steel pipes and fittings
Ausgabedatum: 1999-01 -
*die Norm wurde zurückgezogen
-
Polyethylen coatings of steel pipes and fittings - Part 2: Requirements and testings of factory-applied sintered or flame sprayed coatings
-
*die Norm wurde zurückgezogen
-
Polypropylen coatings of steel pipes and fittings - Part 1: Requirements and testings of factory-applied extruded coatings
-
Corrosion protection - Overview of Characteristics and Test Methods for Factory and Field Coatings
-
Corrosion of metals - Corrosion testing - Part 2: Values of corrosion with uniform corrosion attack
Ausgabedatum: 1987-01 -
Corrosion of metals - Testing and assessment of the corrosion protection of coated metallic materials under corrosive action by aqueous media
Ausgabedatum: 1985-09 -
Polypropylen coatings of steel pipes and fittings - Part 2: Requirements and testings of factory-applied sintered or flame sprayed coatings
-
Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 3: Buried and underwater pipelines and structural components
Ausgabedatum: 2016-05 -
Testing of plastics and elastomer films, paper, board and other sheet materials - Determination of water vapour transmission - Part 1: Gravimetric method
Ausgabedatum: 2001-08 -
Kunststoffe – Folien und Flächengebilde – Bestimmung der Wasserdampfdurchlässigkeit – Teil 3: Elektrolytnachweis-Sensorverfahren (ISO 1516-3:2003); Deutsche Fassung EN ISO 15106-3:2005
Ausgabedatum: 2005-05 -
Polyethylen coatings ofsteel pipes and fittings - Part 1: Requirements and testings of factory-applied extruded coatings
-
DIN ISO 34-1:2024-12 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces (ISO 34-1:2022)
-
Plastics - Determination of water absorption (ISO 62:2008); German version EN ISO 62:2008
-
Plastics - Determination of flexural properties (ISO 178:2019); German version EN ISO 178:2019
-
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019); German version EN ISO 527-1:2019
Ausgabedatum: 2010-05 -
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2025); German version EN ISO 527-2:2025
-
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018); German version EN ISO 527-3:2018
Ausgabedatum: 2010-05 -
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023); German version EN ISO 527-4:2023
Ausgabedatum: 1997-07 -
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021); German version EN ISO 527-5:2021
-
Plastics - Evaluation of the action of microorganisms (ISO 846:2019); German version EN ISO 846:2019
Ausgabedatum 1997-10 -
Stahlrohre und -formstücke fürerd- und wassergelegte Rohrleitungen im Dreischicht-Verfahren extrudierte Polyethylenbeschichtungen (zurückgezogen)
-
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022); German version EN ISO 1133-1:2022
-
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2025); German version EN ISO 1183-1:2025
Ausgabedatum: 2004-05 -
Paints and varnishes - Cross-cut test (ISO 2409:2020); German version EN ISO 2409:2020
-
Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09); German version EN ISO 2431:2019
-
Paints and varnishes - Determination of film thickness (ISO 2808:2019); German version EN ISO 2808:2019
-
Beschichtungsstoffe – Eindruckversuch nach Buchholz (ISO 2815:2003); Deutsche Fassung EN ISO 2815:2003
-
Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:2018); German version EN ISO 3681:2018
-
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method (ISO 4577:2019); German version EN ISO 4577:2019
-
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2023); German version EN ISO 4624:2023
-
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013 + Amd 1:2021); German version EN ISO 4892-2:2013 + A1:2021
-
Kunststoffe – Folien und Flächengebilde – Bestimmung der Wasserdampfdurchlässigkeit – Teil 3: Elektrolytnachweis-Sensorverfahren (ISO 15106-3:2003); Deutsche Fassung EN ISO 15106-3:2005 Ausgabedatum: 2005-05
-
Polyethylen coatings of steel pipes and fittings – Part 1: Requirements and testings of factory-applied extruded coatings
-
Polyethylen coatings of steel pipes and fittings – Part 2: Requirements and testings of factory-applied sintered or flame sprayed coatings
-
Steel tubes and fittings for on and offshore pipelines - External two layer extruded polyethylene based coatings; German version EN 10288:2002
Ausgabedatum: 2003-12 -
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings; German version EN 10289:2002DIN EN 10290:2004-08 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings; German version EN 10290:2002
-
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings; German version EN 10290:2002
-
Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating; German version EN 10300:2005
Ausgabedatum: 2006-02 -
Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings; German version EN 10310:2003
-
Polypropylen coatings of steel pipes and fittings – Part 2: Requirements and testings of factory-applied sintered or flame sprayed coating
-
Polypropylen coatings of steel pipes and fittings – Part 1: Requirements and testings of factory-applied extruded coatings
-
Coal - Determination of plastic properties - Constant-torque Gieseler plastometer method (ISO 10329:2017)
Ausgabedatum: 2006-04 -
Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials; German version EN 12068:1998
Ausgabedatum: 1999-03 -
Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods; German and English version prEN 15189:2026
Ausgabedatum: 2007-02 -
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems- Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018); German version EN ISO 21809-1:2018
-
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014); English version EN ISO 21809-2:2014
-
Oil and gas industries including lower carbon energy - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings(ISO/DIS 21809-3:2025); English version prEN ISO 21809-3:2025
-
Oil and gas industries including lower carbon energy - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 4: Polyethylene coatings (2-layer PE)
-
*die Norm wurde zurückgezogen
ASTM
ANSI/AWWA
API
BS
CAN/CSA
Gost
IGS
IPS
NACE
NF
ÖNORM
UNI
ASTM
-
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
Publication date: 2009,
reapproved: 2013 -
Standard Test Method for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
Publication date: 2011 -
Standard Test Methods for DC Resistance or Conductance of Insulating Materials
Publication date: 2007 -
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
Publication date: 1993,
reapproved: 2008 -
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
Publication date: 2006 -
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
Publication date: 2006 -
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Publication date: 2000,
reapproved: 2012 -
Standard Test Method for Tensile Properties of Plastics
Publication date: 2010 -
Standard Test Method for Brittleness Temperature of Plastics and Elastomers bey Impact
-
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
-
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
-
Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
-
Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
-
Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
-
Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
-
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
-
Standard Test Method for Vicat Softening Temperature of Plastics
-
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
-
Standard Test Method for Rubber Property – Durometer Hardness
-
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
-
Standard Test Method for Rubber Property – Durometer Hardness
-
Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
-
Standard Test Method for Water Absorption of Rigid Cellular Plastics
-
Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
-
Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
-
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
-
Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
-
Standard Test Methods for Water Vapor Transmission of Materials
-
Standard Test Method for Specific Bendability of Pipeline Coatings
-
Standard Test Method for Nondestuctive Measurement of Film Thickness of Pipeline Coatings on Steel
-
Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
-
Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
-
Standard Test Method for Cathodic Disbounding of Pipeline Coatings Subjected to Elevated Temperatures
-
Standard Test Methods for Holiday Detection in Pipeline Coatings
-
Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
ANSI/AWWA
-
AWWA Standard for Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
-
AWWA Standard for Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines (Includes Addendum A,2002)
-
AWWA Standard for Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings
API
- 5L2
BS
- 2782-2
- BS3909,P11
- PSE 16
- 4147
- 4772
CAN/CSA
Gost
IGS
-
Field-Applied Heat Shrinkable Sleeves for Pipelines
IPS
NACE
- RP0169
- RP0394
- RP0169
NF
-
Gießereierzeugnisse – Sphärolitische Gusseisenrohre für Druckleitungen – Polyurethan außen Umhüllung
Ausgabedatum: 08-1985 -
Stahlrohre Auskleidung mit drei Polyaethylenschichten – Aufringung durch Extrusion
Ausgabedatum: 1988-03-01 -
Stahlrohre Auskleidung mit drei Polypropylenschichten – Aufbringung durch Extrusion
Ausgabedatum: 1992-11-01 -
Kunststoffe – Bestimmung des Schmelzindex von Thermoplasten, in Masse (MFI) und in Volumen (MVI)
Ausgabedatum: 03-1993 -
Kuststoffe – Bestimmung des Verhaltens gegenüber Pilzen und Bakterien. Bewertung durch visuelle Beurteilung oder Messung der Änderung des Gewichtes oder physikalischer Eigenschaften
Ausgabedatum: 12-1981
ÖNORM
-
Werksseitig aufgebrachter äußerer Korrosionsschutz von duktilen Gussrohrenmit PE-Bändern – Anforderungen und Prüfungen
-
Werksseitig aufgebrachter Korrosionsschutz von Formstücken aus duktilem Gusseisen mit Pulverbeschichtung – Anforderungen und Prüfungen
-
Duktile Gussrohre – Deckbeschichtung aus Polyurethan oder Epoxidmaterialien – Anforderungen und Prüfungen
-
Oberflächenschutz mit organischen Schutzmaterialien im Siedlungswasserbau – Prüfung der Schutzmaterialien und Anforderungen
UNI
- 5819
- 9099
DVGW Arbeitsblätter
AGK
Alaska TB
EON Ruhrgas
GDF=GRTgaz
OTJSCT
Saudi Aramco
DVGW Arbeitsblätter
-
Verfüllung des Ringraums zwischen Mantel- und Produktenrohren bei der Kreuzung von Bahnanlagen, Straßen und Wasserstraßen
-
Beurteilung der Korrosionsbelastungen von erdüberdeckten Rohrleitungen und Behältern aus unlegierten und niedrig legierten Eisenwerkstoffen in Böden
-
Nachumhüllungen von Rohrleitungen, Armaturen und Formstücken – Qualifikationsanforderungen an den Umhüller
-
FZM-Ummantelung zum mechanischen Schutz von Stahlrohren und -formstücken mit Polyolefinumhüllung (zur Zeit in Überarbeitung)
-
Verfüllung des Ringraums
-
Corrosion protection - Overview of Characteristics and Test Methods for Factory and Field Coatings
-
Ringversuch – Prüfung der Alkalienbeständigkeit von Nachumhüllungssystemen von Rohrleitungen
-
Aufsicht zur Qualitätssicherung der Umhüllungs- und Beschichtungsarbeiten im Werk und auf der Baustelle – Qualitätsanforderungen an den Coating Inspector
-
Nachumhüllungen -Bewertung der Eignung und Verwendbarkeit der Nachumhüllungsmaterialien für erdüberdeckte Rohrleitungen
AGK
- Arbeitsblatt Nr. 1
Alaska TB
- TV 206
EON Ruhrgas
-
Technische Bedingungen für werkseitige Umhüllungen von Stahlrohren, Formstücken und Armaturen im Leitungsbau (ohne Sonderanwendung)
-
Technische Bedingungen für die werkseitige Umhüllung von Stahlrohren, Formstücken und Armaturen für die Sonderanwendung
-
Allgemeine und technische Bedingungen für die Baustellenumhüllung von Stahlrohren, Formstücken und Armaturen
-
Epoxidharz-Innenbeschichtung von Stahlrohren und Rohrbogen im Leitungsbau
GDF=GRTgaz
-
Fourniture et application de systèmes de revêtement à base de
-
External 3-Layer extruded polyetylene or polypropylene based coating, for steel pipes
-
Protection extrene des accessoires de canalisation de transport de gaz
OTJSCT
- IOO-04.0022.00EO/006-1-03
- PP PDS
Saudi Aramco
-
Shop-Applied External FBE Coating
-
Shop-Applied Internal FBE Coatings
-
The Requirements of External Liquid Rigid Polyurethane Coatings for Buried Pipelines and Piping (APCS-113A)
-
Shop-Applied Extruded PE, External Coating System for Line Pipe
Elektrabell
Enagas
TSP
Shell
Snam
SWCC
Statoil
Total
Abu Dhabi
British Gas
Elektrabell
- G017
Enagas
TSP
- 0108-2008
Shell
-
External field joint and Rehabilitation Coating Systems for Line Pipe
Snam
- GASD C.09.04.01
SWCC
- M20
Statoil
- R-SP-634
Total
-
Three layer polyethylene external coating for pipelines
-
Three layer polypropylene external coating for pipelines
-
Fusion Bonded Epoxy (FBE) external coating for pipelines
-
Polyethylene and Polypropylene coatings for bends and fittings
-
External field joint coatings of pipelines
Abu Dhabi
- 30.99.37.0708
British Gas
-
British Gas Engineering Standard Specification for the external protection of steel line pipe and fittings using fusion bonded powder and associated coatings systems: Part 1 – Requirements for coating materials and methods of test
-
British Gas Engineering Standard Specification for the external protection of steel line pipe and fittings using fusion bonded powder an associated coating systems: Part 2 – Factory applied coatings